
Curbless Showers
In Lincoln, Nebraska
Walk-in showers with no curb to step over, built on a sloped, waterproofed floor.
A curbless shower has no step at the entry, so the floor does the work a curb used to do. It is the easiest shower to walk into at any age, and the least forgiving one to build.
Curbless entries change the membrane and slope work underneath the tile, so the drain location gets settled early. Luke wants to see it while the plans can still move, along with any bench or niche, which get squared to the tile.
- Curbless Entries
- Walk-In Showers
- Built-In Benches
- Shower Niches
Four Stages,
Run In The Same Order
Plan the drain and slope
Before anything is torn out, the drain location, the slope and the entry are worked out with you and a licensed plumber, because a curbless floor depends on all three.
Demolition and substrate
The old surface comes out, the framing and subfloor get checked, and anything soft or out of plane is corrected before new material goes in.
Waterproofing
The pan is sloped a quarter inch per foot to the drain and a bonded membrane runs up the walls above the shower head, with pre-formed pieces at every corner.
Tile, grout and walk
Tile goes down to a layout dry-laid and centered on the room, with benches and niches squared to the tile. Grout is sealed, edges get 100% silicone caulk, and you give us the green light before the crew packs up.
The Rest Of What We Set
Common Questions

A Walkthrough First,
Then A Written Scope
Send the room, the tile you like, and a timeline. We will take it from there.
Start a project
